Operational Aspects of Row and Selective Thinning in the Establishing of a Shelterwood in a 50-Year-Old Norway Spruce Stand
Authors
Kjell Suadicani
Danish Centre for Forest, Landscape and Planning
Tomas Nordfjell
Danish Centre for Forest, Landscape and Planning
Abstract
The aim of this study is to investigate the productivity, thinning quotient, reduction in basal area, damage rate, and costs of operation of row and selective thinning in the establishment of a shelterwood in a medium-aged Norway spruce stand. The cutting was performed with a single-grip harvester operating from existing striproads (spacing 15 m) parallel to the tree-rows. Extraction with a forwarder was studied in the same stand.
The two thinnings were more alike than expected. The thinning quotient was 0.9 and the reduction in basal area round 40% in both treatments. The time consumption for harvesting was larger in row than in selective thinning because row thinning was more difficult to perform when the harvester worked from striproads parallel to the tree-rows. No difference in forwarding productivity was found. The damage rate was higher in row than in selective thinning. It is concluded that row thinning from striproads parallel to the tree-rows has a negative influence on both productivity and quality of the work. This type of row thinning is difficult to perform because the tree-rows are difficult to identify and because the trees are more difficult to reach.
The operational aspects should be considered before a thinning method is chosen. Row thinning should preferably be carried out either by driving on removed rows or from striproads perpendicular to the tree-rows.
