Comparison of Two Cut-to-Length Harvesting Systems Operating in Eastern Hardwoods
Authors
Chris B. LeDoux
USDA Forest Service, Morgantown, WV
Neil K. Huyler
USDA Forest Service, Burlington, VT
Abstract
We compared production rates, operating costs, and break-even points (BEP) for small and large cut-to-length (CTL) harvesting systems operating at several machine utilization rates (MUR) in mixed hardwood and softwood stands in Vermont. The small CTL harvester produced 11.08 m3 [391.4 ft3] per productive machine hour (PMH) compared to 14.83 m3 [523.80 ft3] per PMH for the large harvester. The impact of average tree size (volume) on cost was substantial but similar for both CTL systems. At a fixed stump-to-landing logging cost of about $14.12/m3 or [$0.40/ft3], the BEP tree size was 0.14 m3 [5.0 ft3] for the small harvester and 0.26 m3 [9.33 ft3] for the large system at the 85 percent MUR. At an MUR of 70 and 85 percent, the processing cost for trees that averaged 0.08 m3 [3.0ft3] was $22.19 and $18.28/m3 [$0.6285 and $0.5176/ft3], respectively, for the small CTL harvester. Results were similar for the large harvester. Either CTL system would be effective in helping managers meet forest management goals in eastern hardwood stands.
