Skip to main navigation menu Skip to main content Skip to site footer
international hydrographic review logo

Articles

Vol. LXXVI, No. 2

Tides and Water Level Requirements for N.O.S Hydrographic Surveys

Submitted
June 12, 2015
Published
2015-05-22

Abstract

The Center for Operational Oceanographic Products and Services (CO-OPS) of the National Ocean Service (NOS) contributes to the NOAA Nautical Charting Program by establishing requirements for, and providing the critical water level data necessary to produce accurate depth measurements. CO-OPS efforts involve six main functional areas: 1) tide and water level requirement planning; 2) preliminary tidal zoning development; 3) water level station installation, operation and removal; 4) data quality control, processing, and tabulation; 5) tidal datum computation and tidal datum recovery; and 6) generation of water level reducers and final tidal zoning. For each functional area, CO-OPS maintains appropriate specifications and standard operating procedures under the umbrella of an overall Data Quality Assurance Plan (DQAP). The objective of this effort is to provide the tide and water level correction information necessary to reduce soundings to Chart Datum. The goal is to provide water level correction information that meets current error budgets for correctors to soundings. The total uncertainty in the water level corrections are derived from three main sources: 1) errors in the actual measurement of water level; 2) uncertainties in the computation of tidal datums based on short period observations and in the datum recovery process at historical locations; and 3) uncertainties in the application of tidal zoning within the survey area. CO-OPS plans tide and water level requirements by balancing these uncertainties to provide the most effective combination of water level observations and zoning that meets allowable error budgets.